Articulated Arm Gate Automation

Articulated arm gate operators are mounted on the gate posts and use an extended arm to reach around the post to the gate. When viewed from the outside the arms usually blend in with the gate and it becomes difficult to see that the gate is automated.

The simplicity of operation of a winding arm machine always ensures the fastest possible operation of the gate. A common application for these motors is a situation, such as a gateway directly on a main road, where the gates’ opening time needs to be as quick as possible.

Diagram (viewed from above) showing a Ferni motor attached to a pillar and a gate.
  • Ferni
  • Fast
  • Stylo
  • Flex
Ferni Motor download pdfDownload Info Brochure

Ferni

The FERNI articulated arm gate operator is designed to automate gates that are hung from large brick or stone pillars. The FERNI can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.

In the eventuality of a power cut the FERNI has a lever operated manual release mechanism which is situated on the motor casing. The simplicity of operation of a winding arm machine always ensures the fastest possible operating of the gate.

A common application for the FERNI motor is a situation, such as a gateway directly on a main road, where the gates' opening time needs to be as quick as possible.

Fast Motor download pdfDownload Info Brochure

Fast

The FAST operator will automate most lightweight gates up to 2.3m each leaf. The FAST can be operated by all the standard CAME accessories e.g. remote controls, push buttons, keypads etc.

In the eventuality of a power cut the FAST has a lever operated manual release mechanism which is situated on the motor casing. The simplicity of operation of a winding arm machine always ensures the fastest possible operating of the gate.

Stylo Motor download pdfDownload Technical Guide

Stylo

The new Stylo motor is packed with all the latest technological advances you would expect from CAME. It’s compact design features a 24V self-locking motor and encoder-based movement control - helping to limit the forces and therefore ensure EN compliance.

Stylo is perfect for gates hung on small pillars or posts - or even swing garage doors.

Flex Motor download pdfDownload Info Brochure

Flex

The new Stylo motor is packed with all the latest technological advances you would expect from CAME. It’s compact design features a 24V self-locking motor and encoder-based movement control - helping to limit the forces and therefore ensure EN compliance.

Stylo is perfect for gates hung on small pillars or posts - or even swing garage doors.